Generic
Nylon T Fitting
Nylon T Fitting
Couldn't load pickup availability
Nylon Single-Barb T fitting. Useful for dual turbo applications to "T" the line from the boost controller to the two wastegate actuators. Also useful to tap into boost signal line. Maximum temperature rating is 275°F. Not suitable for use within close proximity to turbochargers, exhaust pipes, or other extreme heat sources. The stated size is the outside diameter, not including the barb. Price is for one fitting.
Scroll down for sizing guide.
Sizing Guide for vacuum hose fittings
Sizing Guide
Here are suggested fitting / vacuum hose pairings. These particular pairings are suggested to keep the restriction caused by the fitting to a minimum. As a consequence you may have to expend some effort to get the hose on to the fitting, but vacuum hose is rather forgiving in that regard so with a little water or alcohol used as a lubricant you should be able to twist the vacuum hose on to the suggested fitting size.
2mm vacuum hose -> use 1/8 fitting
3mm vacuum hose -> use 5/32 fitting
3.5mm vacuum hose -> use 3/16 fitting
4mm vacuum hose -> use 3/16 fitting
5mm vacuum hose -> use 1/4 fitting
6mm vacuum hose -> use 5/16 fitting
8mm vacuum hose -> use 3/8 fitting